Aquatrode plus
– combined LL pH glass electrode (6.0253.100) with
fixed ground sleeve diaphragm and double-junction reference system. Its new type
of membrane glass had especially been developed for pH measurement in weakly buffered
samples with low or high conductivity.
The 826 pH mobile can be purchased together with a case.
This way the transport of the meter and the electrode is much
easier.
The case includes also all accessories you need for calibrating
the pH measurement system in the field.
The
pH glass membrane of the Aquatrode plus is made of a newly developed
special glass that is characterized by short response times
and excellent long-term stability.
Practical hints
pH measurement is temperature dependent.
Don't forget to enter the temperature value
of your sample solution into the meter. If
the temperature changes during the measurement
it is recommended to use an Aquatrode Plus
with integrated Pt 1000 temperature sensor
(6.0257.000).
Always
store the electrode in the Storage Solution
6.2323.000 when not in use. This way
you'll
always have
a "ready to go" electrode
of optimal performance. Electrode holder and
electrolyte solution can be carried quite handy
in the accessories case of the 826 pH mobile.
pH measurement in water – quite easy with Metrohm!
