The 826 pH mobile can be purchased together
with a case. This way the transport of the
meter
and
the
electrode is much easier. The case includes
also all accessories you need for calibration
and maintenance
Practical hints
Clean the electrode thoroughly before storage. Always check the membrane and diaphragm of the electrode and make sure there are no residual particles from your sample left behind.
Always store the electrode in 6.2323.000
storage solution when not in use. This way
you'll always have a "ready to go" electrode
with optimal performance. Electrode holder
and electrolyte solution can be carried quite
easily in the accessories case of the 826 pH
mobile.
Samples which contain fruit pieces do not need to be filtered. However it is recommended not to stir during the measurement. Remember to calibrate under the same conditions as you measure: is the sample is not stirred during the measurement, don't stir during the calibration ether.
