pH measurement in electroplating baths and dyestuffs - Metrohm Ltd. (Switzerland)

Previous page | Home page > Electroplating baths and dyestuffs



pH meter	827 pH lab (2.827.0114, with EU plug 230 V; 2.827.0115, with US plug 115 V; 2.827.0117, with AUS plug; 2.827.0119, with UK plug)
Electrode	Unitrode – combined LL pH glass electrode with Pt 1000 temperature sensor, fixed ground-joint diaphragm, fixed cable (6.0258.010)
Accessories	Cable, 1m (6.2104.020; other lengths available) Buffer solutions pH 4 (6.2307.200), pH 7(6.2307.210) and pH 9 (6.2307.220) (30x30 mL sachets) Electrolyte solution c (KCl) = 3 mol/L, 250mL (for Ag/AgCI reference system) (6.2308.020) Storage solution for pH glass electrodes (6.2323.000)



Your advantage	The Metrosensor Unitrode is available at lengths ranging from 125 mm up to 450 mm and can be used at temperatures up to 100°C!
Practical hints	Rinse the electrode thoroughly after each measurement: first with a solvent that will remove all residues from the electrode and then with distilled water. Long live your Long Life (LL) sensor! Make sure that the electrolyte level in the electrode is always just below the filling hole.
pH measurement in electroplating baths and dyestuffs – quite easy with Metrohm!

© 1999-2005 Metrohm Ltd. (Switzerland) - World leaders in ion analysis -