Recommendation for juices: Routine measurement in the plant
pH Meter:
Electrode:
- Unitrode – combined LL pH glass electrode with Pt 1000 temperature sensor, fixed ground-joint diaphragm, fixed cable
Accessories:
- Cable, 1m (other lengths available)
- Buffer solutions
- pH 4, pH 7 and pH 9 (30x30 mL sachets)
- Electrolyte solution c (KCl) = 3 mol/L, 250mL (for Ag/AgCI reference system)
- Storage solution for pH glass electrodes
Optional
- 826 pH mobile with carrying case and calibration accessories
Your advantages:
- The 826 pH mobile can be purchased together with a case. This way the transport of the meter and the electrode is much easier. The case includes also all accessories you need for calibration and maintenance
Practical hints:
- Clean the electrode thoroughly before storage. Always check the membrane and diaphragm of the electrode and make sure there are no residual particles from your sample left behind
- Always store the electrode in the storage solution when not in use. This way you'll always have a "ready to go" electrode with optimal performance. Electrode holder and electrolyte solution can be carried quite easily in the accessories case of the 826 pH mobile
- Samples which contain fruit pieces do not need to be filtered. However it is recommended not to stir during the measurement. Remember to calibrate under the same conditions as you measure: is the sample is not stirred during the measurement, don't stir during the calibration ether
|
